Professional Refurbished

Shipped within 5 days

Trustpilot Reviews

Welcome to 123Miners

Thank you for visiting our E-commerce experience. We are looking forward to serve you as a valued client. We suggest that you get to know the Team and study “Read before buying“.  Still have questions? Don’t hesitate to contact Support.

Beginner or Pro? We can help you.

Whether you are new to crypto mining or have some experience, we have the best crypto mining experts & industry partners to help you on your way Talk to an Expert or download the Beginners guide.

Wholesellers or Bulkorders?

We have a strong commitment to help other operators with a reliable supplychain it doesn’t matter if you looking for a bulk order or that you are a Wholereseller. We got your back. Learn more

  1. Home
  2.  | 
  3. Repair
  4.  | A3 Hash rate is low or a hash board is faulty

A3 Hash rate is low or a hash board is faulty

Repair

Please try to unplug the power, wait for about 20 minutes then reboot the miner. Then please try reloading the firmware: https://shop.bitmain.com/support.htm?pid=00720180209143414844tTh8x2o706B6 Run the miner for 20 minutes after loading. Please first check the PSU and the controller. To check the PSU you can test the machine with a known good PSU. If you do not […]

Please try to unplug the power, wait for about 20 minutes then reboot the miner.

Then please try reloading the firmware: https://shop.bitmain.com/support.htm?pid=00720180209143414844tTh8x2o706B6

Run the miner for 20 minutes after loading.

Please first check the PSU and the controller. To check the PSU you can test the machine with a known good PSU. If you do not have another PSU then check by switching the cables between hash boards. If the issue follows the cable then the PSU may be faulty. Please reply to this email for more instructions.

To test the controller, switch the controller cables between hash boards. If the same hash board shows the issue then the hash board is faulty. If the issue follows the cable then the controller may be faulty. Please contact us for further instructions.

If it still does not work please test each hash board separately to determine which one is defective.

To test each hash board separately: keep the PSU connectors and controller cable on one of the hash boards connected and disconnect the cables from the other two hash boards. With the miner running you can see the status of the connected hash board

Here is more detail: https://support.bitmain.com/hc/en-us/articles/226142788-Testing-hash-board-one-by-one

On the miner status screen defective chips are displayed as “xxx”, “—” or ” ASIC≠60

 

Also good to know

Home
Account
Cart
Quote
Search
EUR
USD
CAD
GBP
EUR
USD
CAD
GBP