Professional Refurbished

Shipped within 5 days

Trustpilot Reviews

Welcome to 123Miners

Thank you for visiting our E-commerce experience. We are looking forward to serve you as a valued client. We suggest that you get to know the Team and study “Read before buying“.  Still have questions? Don’t hesitate to contact Support.

Beginner or Pro? We can help you.

Whether you are new to crypto mining or have some experience, we have the best crypto mining experts & industry partners to help you on your way Talk to an Expert or download the Beginners guide.

Wholesellers or Bulkorders?

We have a strong commitment to help other operators with a reliable supplychain it doesn’t matter if you looking for a bulk order or that you are a Wholereseller. We got your back. Learn more

  1. Home
  2.  | 
  3. Repair
  4.  | Precautions for Connection between Power Supply and Miner

Precautions for Connection between Power Supply and Miner

Repair

There are three connection points between the power supply and the miner: 1. Wire connection with 4pin or 6pin connector 2. Conductive copper plug and socket connection 3. Fixed conductive copper bar *CUATION: It is necessary to prevent the occurrence of poor contact, reverse connection of positive and negative poles, etc., which may cause board loss, […]

There are three connection points between the power supply and the miner:

1. Wire connection with 4pin or 6pin connector

mceclip0.png

2. Conductive copper plug and socket connection

mceclip1.png

3. Fixed conductive copper bar

mceclip2.png

*CUATION:

It is necessary to prevent the occurrence of poor contact, reverse connection of positive and negative poles, etc., which may cause board loss, core loss, burnout and other failures of the computing board.

  • Wire connection with 4pin or 6pin connector

1. Pay attention to the direction of the pins and the base, and do not insert them backwards. The correct direction can be judged by the shape of the buckle, pin and base.mceclip3.png

A: Snap;B:Trapezoidal pin;C:Square pin

2. When carrying the miner, it is strictly forbidden to hold the wire directly, otherwise it will cause the connector to become loose or deformed.

3. The hash board generally requires 3 sets of 6PIN plugs, which must be fully plugged inmceclip4.png

  • Conductive copper plug and socket connection

1. Pay attention to whether the copper plug is completely embedded in the card slot. Due to handling, vibration, improper installation, etc., the copper plug may not be completely inserted into the card slot. As shown in the figure below, you need to press or reinstall to make the copper plug fully fit into the card slot.

mceclip5.png

2. The copper plug lock must be installed correctlymceclip6.png

3. After many times of disassembly and assembly of the copper plug, poor contact with the base may occur. Use needle-nose pliers to adjust the slot gap to ensure that the copper plug is in full contact with the slot.

mceclip7.png

  • Fixed conductive copper bar

Ensure that each screw is fastened, and there is no missing installation, non-fitting, etc.

mceclip8.png

Also good to know

Home
Account
Cart
Quote
Search
EUR
USD
CAD
GBP
EUR
USD
CAD
GBP